Sheet Metal Cabinets
Electrical, control and storage cabinets.
- Material
- Cold rolled · galvanized · stainless 304 / 316
- Typical gauge
- 16 – 12 ga (1.5 – 2.7 mm)
- Enclosure types
- NEMA 250 Type 1, 12, 4, 4X · IEC 60529 IP54 – IP66
- Standards
- CSA C22.2 No. 94.1 / 94.2
Overview
Cabinets and enclosures are laser cut, formed, welded and powder coated, with doors, gaskets, mounting plates and hardware fitted.
Our capabilities
- 01Electrical and control enclosures
- 02Doors, gaskets and locks
- 03Mounting plates and rails
- 04Powder-coated finish
Technical data
| Material | Cold rolled · galvanized · stainless 304 / 316 |
|---|---|
| Typical gauge | 16 – 12 ga (1.5 – 2.7 mm) |
| Enclosure types | NEMA 250 Type 1, 12, 4, 4X · IEC 60529 IP54 – IP66 |
| Standards | CSA C22.2 No. 94.1 / 94.2 |
| Finish | Powder coat, RAL 7035 standard |
Values reflect common industry practice and referenced standards. Final values are set by your drawings and specification.
Our project approach
- 01
Submit drawings & specs
Send your drawings, specifications and quantities. DXF, DWG, STEP or PDF.
- 02
Proposal
A clear technical and commercial proposal with price, scope and delivery date.
- 03
Manufacturing
Fabrication, finishing and inspection to the agreed quality plan.
- 04
Shipping, delivery & local assembly
Delivered to your site, with assembly and installation support locally.
FAQs
What is the difference between NEMA and IP ratings?
NEMA 250 types describe protection against environmental conditions such as rain, dust, hose-down and corrosion, while IEC 60529 IP codes rate protection against solids and water only. A NEMA type can be mapped to a minimum IP code, but not the other way round.
Which enclosure standard applies in Canada?
Enclosures for electrical equipment in Canada are covered by CSA C22.2 No. 94.1 and No. 94.2. We build enclosures to the type and rating your specification calls for.
Who manufactures the parts?
Parts are manufactured within the Ferrokshar Group, in production since 1997. Engineering, project management and on-site support are handled by our team in Toronto, ON.
Who do I deal with?
Our engineering team is your single point of contact, from quote to delivery and after-sales service.
Further reading
Request a quote
Send your drawings and specifications. Our engineers will reply with a detailed proposal.